Brother DCP-L2500D Service Manual Download Page 91

Page: 91 / 307

2-56

Confidential



Error code D200

Detected the modem PCB was not connected.



Error code D800

An error occurred while initializing the touch panel.

Error code D900

Communication between the panel PCB and main PCB was unable while initializing the
touch panel.



Error code DA00

There was no response from the panel PCB for the specified time after initializing the panel
PCB.

Machine Error
Unplug machine, then call Brother.

Step

Cause

Remedy

Connection failure of the
modem flat cable

Reconnect the modem flat cable.

Modem PCB failure

Replace the modem PCB ASSY.

Main PCB failure

Replace the main PCB ASSY.

Print Unable D8
Turn the power off and then back on again.

<User Check>
• Check that there is no object on the touch panel.
• Install the latest firmwares (panel firmware and main firmware).

Step

Cause

Remedy

Connection failure of the touch
panel flat cable

Reconnect the touch panel flat cable.

Touch panel failure

Replace the touch panel ASSY.

Main PCB failure

Replace the main PCB ASSY.

<User Check>
• Install the latest firmwares (panel firmware and main firmware).

Step

Cause

Remedy

Touch panel failure

Replace the touch panel ASSY.

Main PCB failure

Replace the main PCB ASSY.

Summary of Contents for DCP-L2500D




















































































































































































































































































































Search results

Summary of Contents for DCP-L2500D

Reviews:

Related manuals for DCP-L2500D

Brands by name

Popular brands

Brother DCP-L2500D, Service Manual

Search results

Summary of Contents for DCP-L2500D

Reviews:

Related manuals for DCP-L2500D

Brands by name

Popular brands