3-6
Confidential
5
LUBRICATION
Apply the specified lubricants to the lubrication points as shown below.
Head/carriage unit
Apply a 1.5 mm diameter ball of grease (Permalub BAN-5) to the contact point between the
head/carriage unit and the switching lever.
Lubricant type
(Manufacturer)
Lubrication points
Lubricant amount
per point
Permalub BAN-5
(Nippon Koyu)
Head/carriage unit
1
1.5 mm diameter ball
Switching lever guide
1
3 mm diameter ball
FLOIL BG1319
(Kanto Kasei)
Leveller roller (LR) ASSY
2
1 mm diameter ball
CR guide rail (top face)
36
2 mm diameter ball
(Total of 116
±
36 mg)
CR frame (top face)
36
2 mm diameter ball
(Total of 116
±
36 mg)
CR frame
(inner side of the rear upright edge)
46
2 mm diameter ball
(Total of 148
±
46 mg)
(inner side of the front upright edge)
46
2 mm diameter ball
(Total of 148
±
46 mg)
CR guide rail (bottom face)
6
1 mm diameter ball
Molykote EM-30LP
(Dow Corning)
Document pick-up roller
2
2 mm diameter ball
Document separation roller
2
2 mm diameter ball
Paper pull-in roller L
2
1 mm diameter ball
Disc guide cover
(slideway for the disc guide)
4
1 mm diameter ball
Outer paper guide
(joint with the switchback roller
shaft)
2
1 mm diameter ball
Apply grease here.
CR guide rail
(3_002)
Head/carriage unit
Switching lever
Summary of Contents for DCP-J925DW
