manualshive.com logo in svg

Brother DCP-J785DW, User Manual

Share
Download
Brother DCP-J785DW User Manual Download Page 357

 Home > 

Network

 > 

Additional Methods of Configuring Your Brother Machine for a Wireless

Network

 > Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup

™

(WPS)

Configure Your Machine for a Wireless Network Using the PIN Method
of Wi-Fi Protected Setup

™

 (WPS)

If your wireless LAN access point/router supports WPS, you can use the Personal Identification Number (PIN)
Method to configure your wireless network settings.

The PIN Method is one of the connection methods developed by the Wi-Fi Alliance

®

. By submitting a PIN

created by an Enrollee (your machine) to the Registrar (a device that manages the wireless LAN), you can set up
the wireless network and security settings. For more information on how to access WPS mode, see the
instructions provided with your wireless access point/router.

Type A

Connection when the wireless LAN access point/router (1) doubles as the Registrar.

1

Type B

Connection when another device (2), such as a computer, is used as the Registrar.

1

2

Routers or access points that support WPS are marked with this symbol:

1. Press 

 

[Settings]

 > 

[All Settings]

 > 

[Network]

 > 

[WLAN]

 > 

[WPS w/ PIN Code]

.

2. When 

[Switch Network interface to wireless?]

 or 

[Enable WLAN?]

 appears, press 

[Yes]

.

The wireless setup wizard starts. To cancel, press 

[No]

.

3. The LCD displays an eight-digit PIN and the machine starts searching for a wireless LAN access point/router.
4. Using a computer connected to the network, type in your browser's address bar the IP address of the device

you are using as the Registrar. (For example: http://192.168.1.2)

5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions.

351

Summary of Contents for DCP-J785DW







































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands