Brother DCP-J772DW, Online User'S Manual

Page: 243 / 558

Home > Fax > Telephone Services and External Devices > Set the Telephone Line Type
Set the Telephone Line Type
Related Models : MFC-J890DW/MFC-J895DW
If you are connecting the machine to a line that features PBX or ISDN to send and receive faxes, you must select
a Telephone Line Type that matches your line's features.
1. Press
[Settings]
>
[All Settings]
>
[Initial Setup]
>
[Phone Line Set]
.
2. Press
[Normal]
,
[PBX]
, or
[ISDN]
.
3. If you selected
[PBX]
, do the following steps:
a. Press
[On]
or
[Always]
.
• If you select
[On]
, the machine dials a prefix number before the fax number only when
[R]
is pressed.
• If you select
[Always]
, the machine always dials a prefix number before the fax number.
b. Press
[Dial Prefix]
.
c. Enter the prefix number using the touchscreen, and then press
[OK]
.
Use the numbers 0 to 9, #, l and !. You cannot use ! with any other numbers or characters.
4. Press .
Related Information
• Telephone Services and External Devices
• PBX and TRANSFER
• Telephone and Fax problems
236