Brother DCP-J1700DW Online User'S Manual Download Page 26

Page: 26 / 360

Home >

Introduction to Your Machine

> USB / Ethernet Port Locations on Your Brother Machine

USB / Ethernet Port Locations on Your Brother Machine

The USB and Ethernet ports are located inside the machine (Ethernet ports are available only for certain
models).

To install the driver and software necessary to use your machine, go to your model's

Downloads

page at

support.brother.com

1. Place both hands under the plastic tabs on both sides of the machine to lift the scanner cover (1) into the

open position.

2. Locate the correct port (based on the cable you are using) inside the machine as shown.

LAN

USB

Carefully guide the cable through the cable channel and out the back of the machine.

3. Gently close the scanner cover using both hands.

Related Information

•

Introduction to Your Machine

Summary of Contents for DCP-J1700DW








































































































































































































































































































































































Search results

Summary of Contents for DCP-J1700DW

Reviews:

Related manuals for DCP-J1700DW

Brands by name

Popular brands

Brother DCP-J1700DW, Online User'S Manual

Search results

Summary of Contents for DCP-J1700DW

Reviews:

Related manuals for DCP-J1700DW

Brands by name

Popular brands