Brother DCP-9045CDN, User Manual

Page: 90 / 182

82
Print Unable XX
The machine has a mechanical
problem. Turn off the machine’s power switch and then
turn it on again. If the error message continues
leave the machine for several minutes and
then try to print, copy or scan again.
Protected Device
The protect switch of the USB
flash memory drive is on. Turn off the protect switch of the USB flash
memory drive.
Registration
Registration failed. Press Mono Start or Colour Start and try it
again.
Do one of the following:
„ Try Manual Registration, Menu , 3 , 8 . (See
Manual Registration in the Software User’s
Guide on the CD-ROM
.)
„ Put in a new belt unit. (See Replacing the
belt unit on page 127.)
„
Put in a new drum unit. (See Replacing the
drum unit on page 120.)
„ Replace the empty toner cartridge with a
new one.
(See Replacing a toner cartridge
on page 115.)
„ Turn off the machine’s power switch.
Wait a few seconds, then turn it on again.
„
If the problem continues, call your Brother
dealler.
Rename the File
There is already a file on the USB
flash memory drive with the same
name as the file you are trying to
save. Change the file name of the file on the USB
flash memory drive or the file you are trying to
save.
Scan Unable XX
The machine has a mechanical
problem. Turn off the machine's power switch and then
turn it on again. If the error message continues
leave the machine for several minutes before
you try it again.
Document is too long for duplex
scanning. Press Stop/Exit . Use a suitable size of paper
for duplex scanning. (See Scan on page 164.)
Scanner Locked
The scanner lock is locked. Open the document cover, and then release
the scanner lock lever.
Press Stop/Exit .
Error Message Cause Action