Troubleshooting
119
B
Reset functions
B
The following reset functions are available:
1
Network
You can reset the internal print server
back to its default factory settings such as
the password and IP address information.
2
All Settings
You can reset all the machine’s settings
back to the factory default.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
NOTE
(DCP-9020CDW)
Unplug the interface cable before you
choose
Network
or
All Settings
.
How to reset the machine
B
a
Press .
b
Press
All Settings
.
c
Swipe up or down, or press
a
or
b
to
display
Initial Setup
.
d
Press
Initial Setup
.
e
Press
Reset
.
f
Press
Network
or
All Settings
to
choose the reset function you want.
g
Do one of the following;
To reset the settings, press
Yes
and
go to step
To exit without making changes,
press
No
.
h
You will be asked to reboot the machine.
Do one of the following;
To reboot the machine press
Yes
for
2 seconds. The machine will begin
the reboot.
To exit without rebooting the
machine, press
No
.
NOTE
• If you do not reboot your machine, the
reset will not complete and your settings
will remain unchanged.
• You can also reset the Network settings
by pressing
,
All Settings
,
Network
,
Network Reset
.