Brother DCP-8070D User Manual Download Page 77

Page: 77 / 122

Document jams

If the document is jammed, follow the steps
below.

IMPORTANT

After removing a jammed document,
check that no paper scraps are left in the
machine that could cause another jam.

Document is jammed in the top of the
ADF unit

Take out any paper from the ADF that is
not jammed.

Open the ADF cover.

Pull the jammed document out to the
right.

Close the ADF cover.

Press

Stop/Exit

Document is jammed under the
document cover

Take out any paper from the ADF that is
not jammed.

Lift the document cover.

Pull the jammed document out to the
left.

Close the document cover.

Press

Stop/Exit

Document is jammed at the ADF
output tray

Take out any paper from the ADF that is
not jammed.

Pull the jammed document out to the
right.

Press

Stop/Exit

Summary of Contents for DCP-8070D



























































































































Search results

Summary of Contents for DCP-8070D

Reviews:

Related manuals for DCP-8070D

Brands by name

Popular brands

Brother DCP-8070D, User Manual

Search results

Summary of Contents for DCP-8070D

Reviews:

Related manuals for DCP-8070D

Brands by name

Popular brands