Brother DCP-8070D User Manual Download | Manualshive

Page: 56 / 122

background image

Safety and legal

49

A

Important safety instructions

A

1 Read all of these instructions.

2 Save them for later reference.

3 Follow all warnings and instructions marked on the product.

4 Unplug this product from the wall socket before cleaning inside of the machine. DO NOT use

liquid or aerosol cleaners. Use a dry lint-free soft cloth for cleaning.

5 DO NOT place this product on an unstable cart, stand, or table. The product may fall, causing

serious damage to the product.

6 Slots and openings in the casing at the back or bottom are provided for ventilation. To ensure

reliable operation of the product and to protect it from overheating, these openings must not
be blocked or covered. The openings should never be blocked by placing the product on a bed,
sofa, rug, or other similar surface. This product should never be placed near or over a radiator
or heater. This product should never be placed in a built-in installation unless adequate
ventilation is provided.

7 This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure, contact
a qualified electrician.

8 This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call
your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded
plug.

9 Use only the power cord supplied with this machine.

10 DO NOT allow anything to rest on the power cord. DO NOT place this product where people

can walk on the cord.

11 Use the product in a well-ventilated area.

12 The power cord, including extensions, should be no longer than 5 metres.

DO NOT share the same power circuit with other high powered appliances, such as an air
conditioner, copier, shredder, and so on. If you cannot avoid using the printer with these
appliances, we recommend that you use a voltage transformer or a high-frequency noise filter.

Use a voltage regulator if the power source is not stable.

13 DO NOT place anything in front of the machine that will block printed pages. DO NOT place

anything in the path of printed pages.

14 Wait until pages have exited the machine before picking them up.

«
...
54
55
56
57
58
...
»

Summary of Contents for DCP-8070D



























































































































Reviews:

No comments

Related manuals for DCP-8070D

Brand: Oki Pages: 40

Brand: QMS Pages: 27

Brand: QMS Pages: 3

Brand: Radio Shack Pages: 62

Brand: Canon Pages: 30

Brand: OKIDATA Pages: 182

Brand: Lexmark Pages: 11

Brand: Partner Pages: 34

Brand: ABLE Systems Pages: 4

VarioPrint 6180

Brand: Oce Pages: 306

WorkCentre 7328

Brand: Xerox Pages: 8

Brand: Xerox Pages: 20

IM C6000 Series

Brand: Ricoh Pages: 2

Blaster ADVANTAGE

Brand: CognitiveTPG Pages: 20

Brand: Oce Pages: 366

Brand: Xerox Pages: 4

Brand: Dascom Pages: 2

Brand: Xerox Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands