Brother DCP-7010L Page 60 Software User'S Manual Download

Page: 60 / 117

4 - 1

MFC Remote Setup

The MFC Remote Setup application enables you to configure
many MFC settings from a Windows

application. When you

access this application, the settings on your machine will be
downloaded to your PC and displayed on your computer
screen. If you change the settings, you can upload them
directly to the machine.

Note

You cannot use the MFC Remote Setup application if your
machine is connected via a Network. (See Network User’s
Guide.)

From the

Start

menu, select

Programs

Brother

MFL-Pro Suite MFC-XXXX

(Where XXXX is your model

name), and then select

MFC Remote Setup

button

When you click

, the process of uploading the data to the machine begins. The MFC Remote Setup

program is closed if an error message is displayed, enter the correct data again and then click

Cancel

button

The

Cancel

button clears your changes and exits the MFC Remote Setup application without uploading any

data to the machine.

Apply

button

The

Apply

button uploads the data to the machine, but stays in the Remote Setup application so you can

make more changes.

Print

button

The

Print

button prints the selected items on the machine. You cannot print the MFC Remote Setup changes

until you click the

Apply

button to upload the new data to the machine. Then you can click the

Print

button

to get an up-to-date printout.

Export

button

Click the

Export

button to save your current settings to a file.

Import

button

Click the

Import

button to read the settings from your saved file into the MFC Remote Setup screen.

Note

You can use the

Export

and

Import

buttons to save and use several sets of settings for your machine.

Using MFC Remote Setup (For Windows

)

(not available for DCP-7010L and DCP-7025)

Summary of Contents for DCP-7010L






















































































































Search results

Summary of Contents for DCP-7010L

Reviews:

Related manuals for DCP-7010L

Brands by name

Popular brands

Brother DCP-7010L, Software User'S Manual

Search results

Summary of Contents for DCP-7010L

Reviews:

Related manuals for DCP-7010L

Brands by name

Popular brands