Brother DCP-2537DW Service Manual Download Page 238

Page: 238 / 340

3-81

Confidential

9.24 Laser unit flat cable / Laser unit

(1) Disconnect the Laser unit flat cable from the Main PCB ASSY and the Laser unit, and

release it from the securing fixtures.

(2) Disconnect the Polygon motor harness from the Main PCB ASSY, and release it from the

securing fixtures.

(3) Remove the four Taptite cup S M3x8 SR screws to remove the Laser unit.

Fig. 3-76

Harness routing: Refer to

“9. Top side of the machine”

“10. Frame L unit (Manual feed

models)”

Note:

• After disconnecting flat cables, check that each cable is not damaged at its end or

short-circuited.

• When connecting flat cables, do not insert them at an angle. After insertion, check

that the cables are not at an angle.

Taptite cup S M3x8 SR

Main PCB ASSY

Laser unit

Laser unit flat cable

Polygon motor harness

Laser unit flat cable

Polygon motor harness

Summary of Contents for DCP-2537DW





















































































































































































































































































































































Search results

Summary of Contents for DCP-2537DW

Reviews:

Related manuals for DCP-2537DW

Brands by name

Popular brands

Brother DCP-2537DW, Service Manual

Search results

Summary of Contents for DCP-2537DW

Reviews:

Related manuals for DCP-2537DW

Brands by name

Popular brands