Brother DCP-2537DW Service Manual Download Page 114

Page: 114 / 340

2-74

Confidential

4.2.2 No paper feeding from MP tray

<User Check>

• Check that the paper is set in the MP tray deeply.

• Check that too much paper is not loaded in the MP tray.

• Check if the machine is used with the MP tray support and MP flap are in closed state.

• Check that the thickness of the paper is 60 to 230 g/m

• Check that the paper tray is not set as the paper tray by the printer driver.

• Flip through the paper and reset it in the MP tray.

• Clean the MP paper pick-up roller.

• Check whether the paper tray is closed correctly.

Step

Cause

Remedy

MP roller holder ASSY
attachment failure

Reattach the MP roller holder ASSY
correctly.

Connection failure of the paper
feed motor flat cable

Reconnect the paper feed motor flat
cable.

Connection failure of the MP
paper empty/registration front
sensor harness

Reconnect the MP paper empty/
registration front sensor harness.

Paper feed motor flat cable
failure

Replace the paper feed motor flat cable.

Paper feed motor failure

Replace the paper feed motor.

Damaged gears in the paper

feed drive system

Replace the frame L unit.

Damaged fuser unit

Replace the fuser unit.

Main PCB failure

Replace the main PCB ASSY.

Summary of Contents for DCP-2537DW





















































































































































































































































































































































Search results

Summary of Contents for DCP-2537DW

Reviews:

Related manuals for DCP-2537DW

Brands by name

Popular brands

Brother DCP-2537DW, Service Manual

Search results

Summary of Contents for DCP-2537DW

Reviews:

Related manuals for DCP-2537DW

Brands by name

Popular brands