manualshive.com logo in svg

Brother DCP-110C, Service Manual

Share
Download
Brother DCP-110C Service Manual Download Page 93

 3-5 

Confidential

 

3.2.1 Scanner Mechanism 

This mechanism consists of the document cover, the scanner unit (scanner cover), and the 

automatic document feeder (ADF)*. 

* MFC620CN/425CN/420CN/DCP120C and FAX2440C only.

 

 

The scanner unit consists of a scanner top cover, CIS unit, CIS drive assembly, and scanner base. 
The detailed illustration on the next page shows the components making up the ADF: document 

pull-in roller, document separation roller, document feed roller, ADF motor, and document front 

and rear sensors. 
For further details on the sensors, see 

Section 3.2.3

. 

 

 

 

ADF*

White-level
reference film

CIS unit

CIS flat cable

Scanner base

CIS rail

CIS idle pulley

CIS drive belt

CIS drive assembly
(CIS motor)

Scanner top cover

Scanner unit
(Scanner cover)

Document cover

 

 

 

Summary of Contents for DCP-110C



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands