Brother ArtCity140 Service Manual Download Page 24

Page: 24 / 151

Basic of Disassembly

2 - 12

Feed unit / Feed control

Basic of

isassembly

Basic of

isassembly

Removal of Feed module

1. Remove the spring (XF5134) from the feed adjusting shaft of feed connecting lever assy and the arm

bed.

2. Remove the three screws (screw, pan (S/P washer) M4X10) from the feed module. And lift up the feed

module to remove it from the two bosses on arm bed, and slide it in the direction of the arrow to remove
the feed adjuster of feed module from the feed adjusting shaft of feed connecting lever assy.

→

Refer to 3 - 11 Disassembly of Feed module.

Screw, Pan (S/P washer) M4X10

Spring (XF5134)

Feed adjusting
shaft

Screw, pan
(S/P washer) M4X10

Bosses

Feed module

Spring
(XF5134)

Summary of Contents for ArtCity140
























































































































































Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands

Brother ArtCity140, Service Manual

Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands