Brother AE2700, Service Manual

Page: 134 / 205

3 - 62
Needle threading mechanism Application of Assembly
Application Application
2-2 Attachment of Thread take up spring
1. Set the spring to the thread guard cover assy
1
as shown in the right
figure.
S06
1
S06
S06
9.5
7.4
THREAD TAKE UP SPRING
XE9100***
2-3 Attachment of Thread guide wire
1. Set the thread guide wire
1
to the groove of the thread guard cover assy
2
.
2
1
2-4 Attachment of Thread guard cover assy
„ Type A
1. Set the thread guard cover assy
1
to the thread tension holder assy
2
as
shown in the right figure, and then secure it with the screw
1
.
*Key point
• Check that engage the 2 protrusions
3
of the thread tension
holder assy
2
with the 2 gullets of the thread guard cover
assy
1
.
<In case of Type B, refer to next page.>
1
1
1 3
2
1
Screw, Pan (S/P washer)
M3X6DA