Brother ADS-2200 Online User'S Manual Download

Page: 34 / 208

Home >

Paper Handling

Load Documents

> Load Receipts, Clippings, Photos, and Other Documents

Load Receipts, Clippings, Photos, and Other Documents

Make sure documents with ink or correction fluid are completely dry.

1. Insert the document into the Carrier Sheet (not included).

•

Set the Paper document in the centre of the Carrier Sheet and align the top of the document with the
top of the Carrier Sheet.

•

If the receipt is longer than the Carrier Sheet, you can fold the receipt in two places so that it overlaps
when you insert it into the Carrier Sheet.

2. Adjust the Paper Guides (1) to fit the width of the Carrier Sheet.

3. Place the Carrier Sheet,

face down

in the ADF between the Paper Guides until you feel it touch the inside of

the machine.

Summary of Contents for ADS-2200
















































































































































































































Search results

Summary of Contents for ADS-2200

Reviews:

Related manuals for ADS-2200

Brands by name

Popular brands

Brother ADS-2200, Online User'S Manual

Search results

Summary of Contents for ADS-2200

Reviews:

Related manuals for ADS-2200

Brands by name

Popular brands