Brother ADS-2200 Online User'S Manual Download

Page: 24 / 208

Home >

Paper Handling

Document Specifications

> Carrier Sheet Recommendations

Carrier Sheet Recommendations

Brother recommends using a Carrier Sheet (not included) to scan the following documents:
•

Documents with a carbon sheet attached

•

Documents written in pencil

•

Documents narrower than 51 mm

•

Documents shorter than 70 mm

•

Pages thinner than 0.08 mm

•

Documents of uneven thickness, such as envelopes

•

Documents with large wrinkles or curls

•

Bent or damaged documents

•

Documents that use tracing paper

•

Documents that use coated paper

•

Photographs (photographic paper)

•

Documents printed on perforated paper

•

Documents printed on unusually-shaped paper (not square or rectangle)

•

Documents with photos, notes, or stickers attached to them

•

Documents that use carbonless paper

•

Documents that use loose-leaf paper or any paper with holes in it

CAUTION

To avoid cutting yourself, do not slide or scrape your hand or fingers along the edge of the Carrier Sheet.

IMPORTANT

•

To avoid warping the Carrier Sheet, do not place the Carrier Sheet in direct sunlight or in an area subject
to high temperatures and high humidity.

•

To avoid damaging the Carrier Sheet, do not bend or pull it. Do not use a damaged Carrier Sheet, as it
may produce incorrect scan results.

Related Information

•

Document Specifications

•

Supplies

Summary of Contents for ADS-2200
















































































































































































































Search results

Summary of Contents for ADS-2200

Reviews:

Related manuals for ADS-2200

Brands by name

Popular brands

Brother ADS-2200, Online User'S Manual

Search results

Summary of Contents for ADS-2200

Reviews:

Related manuals for ADS-2200

Brands by name

Popular brands