Brother ADS-2000e Service Manual Download Page 124 | Manualshive

Page: 124 / 124

background image

Confidential

App. 3-1

APPENDIX 3 INSTALLING MAINTENANCE DRIVER

To identify multiple terminals connected to the computer via USB, the computer needs to
configure the corresponding number of virtual USB devices using a driver or software. If
you connect multiple machines to your computer, the same number of virtual USB devices
will be automatically configured on your computer. To prevent an unlimited number of
virtual USB devices from being configured, use the unique driver installation procedure
described below to enable your computer to identify multiple terminals via one single virtual
USB device.

<Operating Procedure>

(1) Check that the power switch of the machine is OFF. When the machine is connected to

the computer, disconnect the USB cable.

(2) Turn ON the power switch of the computer.

(3) Press and hold the [Stop] and [Scan to PC] buttons simultaneously, and plug the AC

cord into the outlet. Check that the Power LED and the Error LED are lit, and release
these two buttons.

(4) Press the [Scan to PC], [Stop] buttons in this order.The Scan to PC LED lights.

(5) Double-click "maintenance.exe" for the maintenance driver stored in the temporary

folder to execute it.

(6) The Device Driver Installation Wizard startup window appears. Click [Next].

(7) The WHQL alert window appears three times. Click [Continue Anyway] on each

window to continue installation.

(8) The Device Driver Installation Wizard completion window appears. Click [Finish].

(9) Connect the machine to your computer using the USB cable.

(10) The Found New Hardware Wizard startup window appears. Select "Install the software

automatically" and click [Next].

(11) The WHQL alert window appears. Click [Continue Anyway].

(12) When the driver is installed successfully, the Found New Hardware Wizard completion

window appears. Click [Finish].

(13) Repeat steps (10) to (12) three times to complete the unique driver installation

procedure.

(14) Disconnect the USB cable, and turn OFF the power switch of the machine.

«
...
122
123
124

Summary of Contents for ADS-2000e





























































































































Reviews:

No comments

Related manuals for ADS-2000e

Brand: Gallagher Pages: 13

Brand: Xcellon Pages: 8

Brand: CPI Pages: 16

Brand: Allen-Bradley Pages: 115

PowerScan PM9100 Series

Brand: Datalogic Pages: 40

DRS-50 Translingual

Brand: SMART Pages: 12

Brand: TrekStor Pages: 56

Brand: Symbol Pages: 208

Brand: Unitech Pages: 4

Brand: Sunstech Pages: 85

Brand: TagMaster Pages: 26

Brand: ARKSCAN Pages: 54

Brand: SIIG Pages: 8

Brand: RocketFish Pages: 2

Brand: GMW Pages: 46

PROFESSIONAL BARCODE SCANNER 21

Brand: Hammer Pages: 2

Brand: Wasp Pages: 22

Brand: ID Tech Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands