Brother ADS-1200, Online User'S Manual

Page: 167 / 218

Home > Troubleshooting > If You Are Having Difficulty with Your Machine > Network Problems > If You
Want to Check that Your Network Devices are Working Correctly
If You Want to Check that Your Network Devices are Working Correctly
Related Models : ADS-1250W/ADS-1700W
Check Action
Check that your Brother
machine, access point/router,
or network hub is turned on. Check the following:
• The power cord is connected correctly and the Brother machine is turned on.
• The access point/router or hub is turned on and its link button is blinking.
• All protective packaging has been removed from the machine.
• The Front Cover, Separation Pad Cover and Pick-up Roller Cover are completely
closed.
Check your Brother
machine’s network settings,
such as IP address, or the
link status. • For Web Based Management (supported models only)
Start Web Based Management and access your Brother machine. When the Web
Based Management screen appears, click the
Network tab, and then click
Network Status in the left navigation bar.
• ADS-1250W
If the Wi-Fi light on the Control Panel does not light up, the LEDs will indicate an
error status. Make a note of the error status and then correct the error.
See
Related Information : Error and Maintenance Indications .
• ADS-1700W
Press
Settings
>
Network
>
WLAN
>
WLAN Status
>
Status
. If the LCD
displays
Connection Failed
, ask your network administrator whether your IP
address is valid or not.
Check that you can "ping" the
Brother machine from your
computer. Ping the Brother machine from your computer using the IP address or the node name
in the Windows
®
command prompt or Mac Terminal application:
ping
<ipaddress>
or
<nodename>
.
• Successful: Your Brother machine is working correctly and connected to the same
network as your computer.
• Unsuccessful: Your Brother machine is not connected to the same network as your
computer.
• Confirm that the IP address and the Subnet Mask are set correctly.
If you have checked and tried all of the actions but you are still having problems, see the instructions supplied
with your wireless access point/router to find the SSID and the Network Key (Password) information and set
them correctly.
Related Information
• Network Problems
• Your Brother Machine Cannot Scan over the Network
• Your Scanner Cannot Be Detected on the Network During Installation
• Error and Maintenance Indications
163