Brother ADS-1100W, Service Manual

Page: 100 / 119

5-2
Confidential
1.2 List of Maintenance Mode Functions
The maintenance mode functions shaded in the table can be used by end users.
The function numbers above are expressed by the ON/OFF status of the LEDs.
0 = LED OFF
1 = LED ON
Function number
(binary number)
Function Refer to:
0001 Save maintenance information 1.3.1
0010 Save Net Config Print as text 1.3.2
0011 Initialize EEPROM parameters 1.3.3
0100 ADF performance test 1.3.4
0101 Check sensor operation 1.3.5
0110 Acquire white level data and set CIS scan area 1.3.6
0111 Check control panel key operation 1.3.7
1000 Backup machine information 1.3.8
1001 Not in use -
1010 CIS type setting 1.3.9
1011 Not in use -
1100 Install firmware from USB flash memory drive 1.3.10
1101 Quit maintenance mode 1.3.11
E.g.
0110