Brother 893-Z05 Operation Manual Download Page 59

Page: 59 / 110

Touch the “Retrieve Data” key in the home
screen to display the retrieve source selection
screen.

•

in the home screen is blue, the machine

is connected to a wireless network.

Select “Retrieve from CanvasWorkspace (via a
wireless network connection)”.



The mat layout screen appears.

Retrieve from CanvasWorkspace
(Using a USB Cable) (compatible only
with Windows)

When the machine is connected to the computer
with a USB cable, a pattern can be retrieved from
CanvasWorkspace (PC version).

■

Connecting Your Machine to the
Computer

• Compatible models:

IBM PC with a USB port as standard equipment
IBM PC-compatible computer equipped with a
USB port as standard equipment

• Compatible operating systems:

Microsoft Windows 8.1, Windows 10 (except
Windows 10 S mode)

■

USB Cable (Sold Separately)

• We recommend using a USB 2.0 cable (Type A/

B) that is no longer than 2 meters (6 feet).

■

Transferable File Formats

• FCM files opened in CanvasWorkspace

Insert the USB cable connector into the
corresponding USB ports for the computer and
for the machine.

USB port for computer

USB cable connector

Note

• The connectors on the USB cable can only be

inserted into a port in one direction. If it is
difficult to insert the connector, do not insert it
with force. Check the orientation of the
connector.

Summary of Contents for 893-Z05















































































































Search results

Summary of Contents for 893-Z05

Reviews:

Related manuals for 893-Z05

Brands by name

Popular brands

Brother 893-Z05, Operation Manual

Search results

Summary of Contents for 893-Z05

Reviews:

Related manuals for 893-Z05

Brands by name

Popular brands