CHAPTER 12 UNIX PRINTING
12-8
IBM RS/6000 AIX Configuration
The RS/6000 AIX operating system uses the smit program to set up the remote
printer. The procedure is as follows for AIX 4.0 and later:
1.
Enter smit and select "devices".
2.
Select "Printer/Plotter".
3.
Select "Print Spooling".
4.
Select "Add a Print Queue".
5.
Select "Remote".
6.
Enter the following Remote Printer Settings:
Name of queue (user selectable)
Host name of Remote Printer (Print / Fax server name; must match name
in /etc/hosts file or use the Print / Fax server IP address)
Name of queue on remote printer (Print / Fax server binary or text
service name, eg. BINARY_P1 or TEXT_P1).
Type of print spooler. BSD (press the LIST button and choose BSD)
The procedure for pre-V4.0 systems is as follows.
1.
Enter smit and select "devices".
2.
Select "printer/plotter".
3.
Select "manage remote printer subsystem".
4.
Select "client services".
5.
Select "remote printer queues".
6.
Select "add a remote queue".
7.
Enter the following remote queue settings:
8.
Name of queue to add (user selectable)
9.
Activate the queue (Yes).
10.
Destination host (Print / Fax server name; must match name in /etc/hosts
file or use the Print / Fax server IP address)
11.
Name of queue on remote printer (Print / Fax server binary or text
service name, eg. BINARY_P1 or TEXT_P1)
12.
Name of device to add (user selectable; for example lp0)
