164
9
9
Scanning from a Macintosh
9
The Brother machine software includes a TWAIN Scanner driver for Macintosh. You can use this Macintosh
TWAIN Scanner driver with any applications that support TWAIN specifications.
Note
If you want to scan from a machine on a network, choose the networked machine in the Device Selector
application located in
Macintosh HD
/
Library
/
Printers
/
Brother
/
Utilities
/
DeviceSelector
or from the
Model
pop-up menu of ControlCenter2.
Run your Macintosh TWAIN-compliant application. The first time you use the Brother TWAIN driver, set it as
the default driver by choosing
Select Source
. For each document you scan after this, choose
Acquire Image Data
or
Start
. The menu option that lets you choose the Scanner driver may vary depending
on your application.
Note
The method of choosing the default driver or scanning a document may vary depending on the application
you are using.
Scanning an image into your Macintosh
9
You can scan a whole page, or scan a portion after pre-scanning the document.
Scanning a whole page
9
a
Load your document.
b
Adjust the following settings, if needed, in the Scanner Setup dialog box:
Resolution
Scan Type
Document Size
Scanning
9