FOR USERS IN THE UK, EIRE,
MALTA AND CYPRUS ONLY
IMPORTANT
- In the event of replacing the plug fuse, use a fuse approved by ASTA to BS 1362, i.e. carrying the
mark,
rating as marked on plug.
- Always replace the fuse cover. Never use plugs with the fuse cover omitted.
- If the available electrical outlet is not suitable for the plug supplied with this equipment, you should contact
your authorized dealer to obtain the correct lead.
CONGRATULATIONS ON CHOOSING THIS COMPACT
OVERLOCK MACHINE
Your machine is a high quality, easy-to-use product. To fully enjoy all the features, we suggest that you study
this booklet.
If you need more information regarding the use of your machine, your nearest authorized dealer is always
happy to be of service.
Enjoy yourself!
CAUTION
When threading or replacing needle, the main power and light switch of the machine must be switched off or
the plug must be removed from the socket-outlet.
When the machine is not in use, it is recommended that the electric supply plug is disconnected from the wall
socket to avoid any possible hazards.
Notes on the motor
- The maximum operating speed of this sewing machine is 1,300 stitches per minute, which is quite fast
compared to the normal operating speed of 300 to 800 stitches per minute for the ordinary sewing machine.
- The bearings in the motor are made of a special sintered, oil-impregnated alloy mounted in oilsoaked felt to
withstand long hours of continuous operation.
- Continuous operation of the sewing machine can cause heat to build in the motor area, but not enough to
adversely affect its performance.
It is important to keep fabric and paper away from the air openings on the back and sides of the machine so
air can get to these openings.
- When the motor is running, sparks can be seen through the air openings in the motor bracket on the side
opposite the hand wheel. These sparks are produced by the carbon brushes and the commutator, and are
part of the machines normal operation.
WARNING LABELS
(for complying with UL and CSA requirements)
The following warning labels are on the machine.
Be sure to observe the precautions described in the labels.
1
Caution (U.S.A. and CANADA only)
2
Face plate sticker (U.S.A. and CANADA only)
III
2
1
Label locations
Summary of Contents for 4234D
Page 78: ...36 ...
Page 80: ...XB2006401 Printed in Taiwan ...