18
Threading the needle
(using the needle threader)
The needle can be threaded by one-touch
operation using the needle threader.
1. Lower the presser foot lever
1
to lower the
presser foot.
1
2. Pull the end of the thread, which has been
passed through the needle bar thread guide
2
, to the left, then pass the thread through the
notch of the thread guide
3
, and then firmly
pull the thread from the front and insert it into
the slit of the thread guide disk
4
all the way.
NOTE:
Make sure that the thread passes the notch of the
thread guide
3
.
2
3
4
3. Cut the thread with the thread cutter
5
on the
left side of the machine.
#
4. Lower the needle threader lever
6
on the left
side of the machine as much as possible.
6
The thread passes through the eye of the
needle.
5. Release the needle threader lever
6
.
6. Carefully pull the loop of the thread through the
eye of the needle to pull out the end of the
thread.
7. Raise the presser foot lever
1
, then pass the
end of the thread through the presser foot, and
then pull out about 5 cm (2 inches) of thread
toward the rear of the machine.
5cm
Summary of Contents for 4234D
Page 78: ...36 ...
Page 80: ...XB2006401 Printed in Taiwan ...
