BASIC F
AX USE
Sending a Fax
16
2
Sending a Fax
Scanning Adjustment
Contrast
If your document is very light or very dark, you might want to set the contrast accordingly. Use
LIGHT
to send a light document. Use
DARK
to send a dark document. This setting is a temporary
setting.
1
Insert the document face down in the ADF.
2
Press
Menu/Set
,
2
,
2
,
1
.
3
Use
or
to select
AUTO
,
LIGHT
, or
DARK
.
4
When the screen displays your selection, press
Menu/Set
.
5
Press
2
if you have finished choosing settings, and go to Step 6—
OR
—Press
1
if you want to
select additional settings. The display returns to
Setup Send
menu.
6
Enter a fax number and press
Fax Start
.
Fax Resolution
When you have a document in the ADF, you can use the
Fax Resolution
key to temporarily
change the setting. Press
Fax Resolution
repeatedly until the LCD shows the setting you want.
—
OR
—
You can change the default setting.
1
Press
Menu/Set
,
2
,
2
,
2
.
2
Press
or
to select the resolution you want, and then press
Menu/Set
.
3
Press
Stop/Exit
.
Dialling a Number
One Touch Dialling (For FAX-2850 Only)
1
Insert the document face down in the ADF.
2
Press the One Touch key of the location you want to call.
3
Press
Fax Start
.
STANDARD:
Suitable for most typed documents.
FINE:
Good for small print; transmits a little slower than Standard resolution.
S.FINE:
Good for small print or artwork; transmits slower than Fine resolution.
PHOTO:
Use when document has varying shades of grey; slow transmission time.
If you try to use a One Touch or Speed Dial location with no number stored in it,
you hear a warning sound, and screen displays
NOT ASSIGNED
. The display
returns to normal after 2 seconds.
