Brother 2400c - Color Laser Printer, User Manual

Page: 94 / 280

CHAPTER 4 CONTROL PANEL
4–31
■
HRC Setting
When you select “HRC SETTING,” you can set the high resolution
control (HRC). This function is a special function that offers improved
print quality of characters and graphics that conventional laser printers
cannot attain with resolutions of 300 or 600 dpi.
Display Message High Resolution Control
HRC =OFF
Cancel high resolution control.
HRC =LIGHT
Set high resolution control to the light level.
HRC =MEDIUM
Set high resolution control to the medium
level. (Factory setting)
HRC =DARK
Set high resolution control to the dark level.
The following figures show jagged print with the high resolution control
set to “OFF” on the left and clear and crisp print with the control set to
“MEDIUM” on the right.
HRC = OFF HRC = MEDIUM
Fig. 4-5 High Resolution Control
The high resolution control has been factory set to “MEDIUM.” The
“LIGHT” or “DARK” setting might be better depending on the selected
print density. Choose the best setting for clear and crisp printouts.
To check the printout with the high resolution control, perform the test
print with the
Test
button. For operation, see “TEST Button.”
Lines in the test pattern are smoother if the high resolution control is set
to LIGHT, MEDIUM, or DARK. Choose an HRC setting and perform the
test print so that stepped lines become unnoticeable.
HRC = OFF HRC = MEDIUM
Fig. 4-6 High Resolution Control in Test Printout