Brother 2400c - Color Laser Printer User Manual Download Page 65

Page: 65 / 280

USER’S GUIDE

4–2

Printer Status Messages (on the upper row)

The following table shows the printer status messages that are displayed
during normal operation:

Printer Status Message

Meaning

00 READY 001P T1

The printer is ready to print.

00 IDLE 001P T1

The printer is idle. (BR-Script 2 mode only)

AUTO PCL5C

The printer is off-line and currently in HP
PCL5C mode under AUTO emulation
mode selection.

HP PCL5C

The printer is off-line and in HP PCL5C
mode under HP LaserJet emulation mode
selection.

00 BUSY 001P T1

The printer is busy. (BR-Script 2 mode
only)

00 SLEEP 001P T1

The printer is in sleep status (power save
mode).

01 PRINT 001P T1

The printer is printing.

01 PR300 001P T1

The printer is printing by decreasing the
resolution from 600 dpi to 300 dpi because
of insufficient memory.

02 WAIT 001P T1

The printer is warming up.

04 SELF TEST

The printer is performing self-diagnosis.

05 TEST PRINT

The printer is printing the test pattern.

06 DEMO PAGE

The printer is printing the demonstration.

06 PRINT CONFIG

The printer is printing the list of the current
printer settings.

06 PRINT FONTS I

The printer is printing the list of the internal
or resident fonts.

06 PRINT FONTS C

The printer is printing the list of the
optional fonts stored in an installed font
cartridge/card.

06 PRINT FONTS P

The printer is printing the list of the
permanent download fonts.

06 CARD1 PRINT

The printer is printing the contents of a
flash memory card in slot 1.

06 CARD2 PRINT

The printer is printing the contents of a
flash memory card or HDD card in slot 2.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands

Brother 2400c - Color Laser Printer, User Manual

Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands