manualshive.com logo in svg

Brother 2400c - Color Laser Printer, User Manual, Page: 54 / 280

Share
Download
Brother 2400c - Color Laser Printer User Manual Download Page 54

CHAPTER 3 BEFORE WORKING WITH THE PRINTER

3–5

ABOUT THE CONTROL PANEL

Selecting the Local Language Display

The display usually shows the current printer status. When you operate
the control panel buttons, it shows functions and settings. If any trouble
occurs, it shows the corresponding error message. You can see these
messages in several languages. The default language is English.

• English

• German

• Spanish

• French

• Dutch

• Italian

To change to another language:

1. Turn off the printer.

2. Hold down the 

Form Feed

 button and turn on the printer.

The message “SELF TEST” appears and then the message changes to
“LANG.=ENGLISH * ”.

3. Press the 

▲

 or 

▼

 button until your desired language appears on the

display.

4. Press the 

Set

 button to make the selected language messages

effective.

An asterisk (*) appears at the end of the display for a short time, and
then the printer automatically returns to the on-line state with the
selected language message on the display.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments