manualshive.com logo in svg

Brother 2400c - Color Laser Printer, User Manual, Page: 50 / 280

Share
Download
Brother 2400c - Color Laser Printer User Manual Download Page 50

CHAPTER 3 BEFORE WORKING WITH THE PRINTER

3–1

CHAPTER 3
BEFORE WORKING WITH THE PRINTER

AUTOMATIC EMULATION SELECTION

This printer has an automatic emulation selection function. When the
printer receives data from the computer, it automatically selects the
emulation mode. This function has been factory set to ON.

The printer can select the emulation among the following combinations:

EPSON/IBM Priority

EPSON (default)

IBM

Auto Selection Mode

HP PCL 5C

HP PCL 5C

BR-Script 2

BR-Script 2

HP-GL

HP-GL

EPSON FX-850

IBM Proprinter XL

To get the most out of this laser printer, we recommend you use the HP
color printer emulation (PCL5C) mode automatically. Since PCL5C
mode takes the highest priority in the automatic emulation selection, you
can start using the printer as it is with the factory settings in most cases.

When the automatic emulation selection is active, you can check the
current emulation on the display. When the printer is in ready, print, or
wait states, the display reads as follows:

Emulation

Status Display in Ready State

HP PCL5C

LJ READY 001P T1

BR-Script 2 

BS IDLE  001P T1

HP-GL 

GL READY 001P T1

EPSON FX-850

FX READY 001P T1

IBM Proprinter XL

PR READY 001P T1

✒

  Notes

Emulation modes other than PCL5C and BR-Script 2 are monochrome
emulation modes.

To select the emulation mode manually, use the 

Emulation

 button. For

further information, see “EMULATION Button” in Chapter 4.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments