Brother 2400c - Color Laser Printer User Manual Download Page 49

Page: 49 / 280

USER’S GUIDE

2–22

Prepare Windows NT 4.0 for the Printer

1. Insert the supplied disk for Windows into your floppy disk drive.

2. Click the “START” button and select “Setting”.

3. Select “Printers” and double click “Add Printer”.

4. Follow the instructions in Windows NT.

5. Click “Have Disk”. Then browse and select “Brother HL-2400C series”.

6. Follow the rest of the Windows NT instructions.

✒

Notes

For installation of other printer drivers and information on the latest
printer drivers see:

http://www.brother.com

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands

Brother 2400c - Color Laser Printer, User Manual

Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands