Brother 2400c - Color Laser Printer User Manual Download Page 47

Page: 47 / 280

USER’S GUIDE

2–20

Installing the Printer Driver

Computer Requirements

The following are the minimum computer requirements to setup and
operate the printer.

CPU: 80486 or higher

(Pentium recommended)

RAM: 8 MB or more for Windows 95, 98, 3.1 / 3.11 and NT 4.0

(16 MB or more recommended)

Hard Disk Drive: 10Mbyte free space available

(more space is necessary for printing)

OS: Windows 95, 98, 3.1x, NT4.0

✒

Note

Use only a shielded Interface cable that is IEEE 1284 compliant and less
than 1.8m (6 feet ) long.

Prepare Windows 95/98 for the Printer

Insert the supplied disk for Windows into your floppy disk drive.

2. Click the “START” button and select “Setting”.

3. Select “Printers” and double click “Add Printer”.

4. Follow the instructions in Windows 95/98.

5. Click “Have Disk”. Then browse and select “Brother HL-2400C series”.

6. Follow the rest of the Windows 95/98 instructions.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands

Brother 2400c - Color Laser Printer, User Manual

Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands