manualshive.com logo in svg

Brother 2400c - Color Laser Printer, User Manual, Page: 41 / 280

Share
Download
Brother 2400c - Color Laser Printer User Manual Download Page 41

USER’S GUIDE

2–14

Connecting the Printer to Your Computer

This printer has a bi-directional parallel interface and an RS-232C serial
interface. They allow the printer to communicate with IBM/PC

®

 or

compatible computers. Before connecting the printer and computer, you
need to purchase a connecting cable specifically made for the interface to
be used

Since the automatic interface selection mode has been factory set, simply
connect the interface cable to the printer. In some cases, you need to turn
off the high-speed and bi-directional parallel communications with the

Mode

 button. For further information, see “MODE Button” in Chapter 4.

When you use the serial interface, you need to have the same
communications settings on both the printer and computer. Since the
automatic interface selection mode has been factory set with certain
factory settings (baud rate = 9600, code type = 8 bits, parity = none, stop
bit = 1, Xon/Xoff = ON, DTR (ER) = ON, and Robust Xon = ON), you
may simply connect the interface cable if these are the same as the
settings on your computer. When necessary, set the communications
parameters with the 

Mode

 button on the printer. For further information,

see “MODE Button” in Chapter 4. For the settings on the computer, see
the manual of the computer or software you use.

Connect the printer to your computer as follows:

1. Make sure that both the computer and the printer are turned off.

!

Caution

Always turn off the printer and computer when connecting and
disconnecting the cable.

2. Connect one end of the interface cable to the interface connector

located on the back of the printer.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Reviews:

No comments