Brother 2400c - Color Laser Printer User Manual Download Page 131

Page: 131 / 280

USER’S GUIDE

4–68

RESET Button

You can reset the printer with the

Reset

button. The print data that the

printer has already received from the computer is cleared and the printer
settings are restored to the user settings or factory settings.

Any temporary download fonts and macro settings you set with
commands in HP PCL5C mode are also cleared.

When you want to reset the printer, hold down the

Shift

button and press

the

Reset

button. You then enter the reset mode where you reset the

printer.

To reset the printer, follow these steps:

1. Press the

Sel

button to set the printer off-line.

2. Hold down the

Shift

button and press the

Reset

button.

When you enter the reset mode, the display shows the first reset mode
item.

3. Press the

▲

▼

button until the desired reset mode appears on the

display.

Display Message

Reset Mode

RESET PRINTER

Resets the printer and restores all
printer settings–including
command settings–to settings you
have previously made with the
panel buttons.

RESET SETTING 1

Resets the printer and restores all

RESET SETTING 2

printer settings–including
command settings–to the selected
number (1-2) of user settings you
have previously made with the

Mode

button.

FACTORY SETTINGS

Resets the printer and restores all
printer settings–including
command settings–to the factory
settings. See “List of Factory
Settings.”

RESET PARTS LIFE

This menu appears only when a
maintenance part is being
recommended for replacement.
Resets the life counter of the
maintenance part that has been
replaced.

exit

Exits from the reset mode. The
printer is not reset.

Summary of Contents for 2400c - Color Laser Printer

























































































































































































































































































Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands

Brother 2400c - Color Laser Printer, User Manual

Search results

Summary of Contents for 2400c - Color Laser Printer

Reviews:

Related manuals for 2400c - Color Laser Printer

Brands by name

Popular brands