background image

About this printer

1 - 19

1

Paper orientation for manual duplex printing

The printer prints the second page first.

If you print 10 pages on 5 sheets of paper, it will print page 2 then page 1 on the first sheet of paper.

It will print page 4 then page 3 on the second sheet of paper.

It will print page 6 then page 5 on the third sheet of paper, and so on.

When doing manual duplex printing, the paper must be put in the paper tray in the following way:

For the manual feed slot:

Put the side to be printed on first, face-up, with the leading edge (top) of the paper in first.

To print the second side, put the paper face down, with the leading edge (top) of the paper in first.

If letterhead paper is used, this would be put in with the heading face down, and in first.

To print the second side, put the heading face up and in first.

For the paper tray:

Put the side to be printed on first, face down, with the leading edge (top) of the paper at the front of the 
tray.

To print the second side, put the paper face up, with the leading edge (top) of the paper at the front of the 
tray.

If letterhead paper is used, this would be put in the paper tray with the heading face up, and at the front 
of the tray.

To print the second page, put the heading face down and at the front of the tray.

Summary of Contents for 2070N - B/W Laser Printer














































































































Reviews: