manualshive.com logo in svg

Brother 1870N - HL B/W Laser Printer, User Manual

Share
Download
Brother 1870N - HL B/W Laser Printer User Manual Download Page 134

 

 

5-14 

C

C

l

l

e

e

a

a

n

n

i

i

n

n

g

g

 

 

 
 
 

Clean the printer exterior and interior routinely. If printouts are stained with 
toner, clean the printer interior and Drum Unit. 

 
 
 

! 

Cleaning the Printer Exterior 

 

 

☛

☛

☛

☛

  1.

 

Turn off the printer, and then unplug the power cord.  

 

 

 

 Warning 

There are high voltage electrodes inside the printer.  Before cleaning the 
printer, make sure you have turned off the power switch and unplugged the 
power cord from the power outlet. 
 

 

 

 
 

 

☛

☛

☛

☛

 2.

 

Wipe dirt and dust away from the printer exterior with a damp cloth and 
allow the printer to dry completely before turning the power on again.  

 
 
 

✒

✒

✒

✒

  Note 

Use water or neutral detergents for cleaning. Cleaning with volatile liquids 
such as thinner or benzene will damage the surface of the printer.  
Do not use cleaning materials that contain ammonia. They will damage the 
printer and the Toner Cartridge.  

 
 
 

☛

☛

☛

☛

 3.

 

Plug in the power cord, and then turn on the power switch. 

Summary of Contents for 1870N - HL B/W Laser Printer













































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands