manualshive.com logo in svg

Brother 09055CDN, Service Manual

Share
Download
Brother 09055CDN Service Manual Download Page 12

i

Confidential

REGULATION

■

Approval Information (MFC only) 

THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE 
FITTED WITH THE APPROPRIATE CONNECTOR. 

Brother advises that this product may not function correctly in a country other than where it 
was originally purchased, and does not offer any warranty in the event that this product is used 
on public telecommunication lines in another country. 

■

Declaration of Conformity (Europe only) (MFC-9460CDN/MFC-9465CDN only)

We, Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan
declare that this product is in compliance with the essential requirements of Directives 
1999/5/EC and 2005/32/EC.
The Declaration of Conformity (DoC) is on our Website.
Please go to http://solutions.brother.com/.
- choose region (eg. Europe)
- choose country
- choose your model
- choose “Manuals”
- choose Declaration of Conformity (Select Language when required.)

■

Declaration of Conformity (Europe only) (DCP-9055CDN only)

We, Brother Industries, Ltd.
15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan
declare that this product is in compliance with the essential requirements of Directives 
2004/108/EC, 2006/95/EC and 2005/32/EC. 
The Declaration of Conformity (DoC) is on our Website.
Please go to http://solutions.brother.com/.
- choose region (eg. Europe)
- choose country
- choose your model
- choose “Manuals”
- choose Declaration of Conformity (Select Language when required.)

Summary of Contents for 09055CDN















































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands