Brother Industries DCP-T520W, Online User'S Manual

Page: 173 / 501

Home > Fax > Receive a Fax > Memory Receive Options > Use PC-Fax Receive to Transfer Received
Faxes to Your Computer (Windows only)
Use PC-Fax Receive to Transfer Received Faxes to Your Computer
(Windows only)
Related Models : MFC-T920DW/MFC-T925DW
Turn on the PC-Fax Receive feature to automatically store incoming faxes to your machine's memory, and then
send them to your computer. Use your computer to view and store these faxes.
• This feature is available only for black and white faxes.
• Before you can set up PC-Fax Receive, you must install the Brother software and drivers on your
computer. Make sure your computer is connected and turned on. You must have the PC-FAX Receiving
software running on your computer.
Even if your computer is turned off, your machine will receive and store faxes in its memory. When you start your
computer and the PC-FAX Receiving software runs, your machine transfers faxes to your computer
automatically.
1. Press Ajustes (Settings) .
2. Press
a
or
b
to select the following:
a. Select
[Fax]
. Press OK .
b. Select
[Setup Receive]
. Press OK .
c. Select
[PC Fax Receive]
. Press OK .
d. Select
[On]
. Press OK .
The LCD displays the message
[Run the PC-Fax Receive program on your computer.]
.
e. Press
c
.
f. Select
[<USB>]
or the name of the destination computer you want to receive faxes if you are on a
network. Press OK .
g. Select
[Backup Print: On]
or
[Backup Print: Off]
. Press OK .
3. Press Detener/Salir (Stop/Exit) .
To change the destination computer, repeat these steps.
Related Information
• Memory Receive Options
Related Topics:
• Transfer Your Faxes or Fax Journal Report
• Transfer Faxes to Your Computer
• Receive Faxes Using PC-FAX Receive (Windows)
167