ASSEMBLY GUIDE
Hemingford Accent Chair
v1.0
Page 1: ...ASSEMBLY GUIDE Hemingford Accent Chair v1 0 ...
Page 2: ...ss and utilise these components in the next steps Turn the chair seat so that the underside is facing you Follow the coloured string to the component compartment Unzip this and take out the additional components then zip it back up Chair seat x 1 Chair back rest x 1 Unpacking M M 80 A x 2 Front legs B R x 1 Back right leg B L x 1 Back left leg C x 12 60mm bolts D x 5 80mm bolts E x 17 Washer F x 1...
Page 3: ... of the seat is facing you Align one front leg A over the screw slots so that they overlap Fit a washer E to a 60mm bolt C and place it into one screw hole Turn the bolt with the allen key F until it is secure but do not tighten yet Repeat for the other two bolts for that leg Repeat those steps again for the second front leg A as well as for the left and right back legs B L B R in their correct po...
Page 4: ... put any pressure on the legs while you turn the chair Step 3 F x 1 Step 4 Place the chair on a flat surface then sit on the chair and shift your weight around until the legs are level and the chair does not rock Then use the allen key F to tighten all the bolts Enjoy your new chair ...
