6
7
LOCATION OF PARTS
Warning
Do not put the power cord
under the chair.
MOVING THE CHAIR
POSITIONING THE CHAIR
1. To move the massage chair, press
down on the back of the chair and tilt
chair on to its wheels at a 45
o
angle.
2. Slowly push and maneuver the
massage chair to the desired location.
Lower the chair slowly and smoothly
until it is fully flat on the ground.
• Do not move the massage chair when
someone is sitting in it. This will cause
the chair to tip over, resulting in acci-
dent and injuries.
• Moving the massage chair may cause
damage to floors. Floor protection, such
as rugs or carpet, is recommended.
• Do not drop or suddenly let go of the
chair when moving, as it may damage
the chair.
• To avoid injury and minimize the chance
of dropping the chair, it is recommended
that two people move the chair.
• Do not move by pulling on the cord or
on the controller.
Caution
When positioning your Energize™ 3D
Massage Chair, allow sufficient space
between the chair and walls or other
obstacles, and place in an appropriate
location.
• Allow 2 to 4 inches (5 to 10 cm)
between the back of the chair and any
walls or obstacles.
• Allow 32 inches (80 cm) between the
footrest and any walls or other obsta-
cles.
• Place on a dry, level surface.
• To avoid signal interference, place the
chair a minimum of four feet away from
audio/visual equipment, such as televi-
sions and radios.
• Do not place in direct sunlight or in
places of high temperature.
Shoulder Air Cells
Headrest
Speakers
Backrest Cushion
Arm Air Cells
Controller
Hip Air Cells
Legrest
Footrest
Wheels
Power Switch
Fuse
Power Inlet
Quick Access Panel
2 - 4 in.
32 in.