6
7
CHARGING THE BATTERIES
The 4-in-1 Wine Set includes four Ni-MH batteries . Fully charge the batteries before
first use . Charging time is approximately 15 hours .
To charge the batteries:
1 .
Plug one end of the AC Adapter cord into the charging base and the other end
into an electrical power outlet .
2 . Place the Wine Opener into the charging base . Ensure that the Wine Opener
stands firmly in the base and is fully engaged into the charging connector .
When the unit is seated properly and the base is connected to an electrical
outlet, the LED Indicator will be red . NOTE: The Wine Opener will only fit into
the charging base one way .
3 . It will take approximately 15 hours to fully charge the Wine Opener . When fully
charged, the LED Indicator will turn off . The Wine Opener can be used to open
or preserve approximately 25 to 30 wine bottles with one full charge .
To maintain a full charge, leave the adapter connected and the Wine Opener on the
charging base .
USING THE FOIL CUTTER
Before removing the cork from a wine bottle, you must remove the foil wrapper from
the top of the bottle .
To remove the foil wrapper:
1 .
Place the Foil Cutter over the top of the wine bottle .
2 . Keeping one hand on the lower part of the bottle, squeeze the Foil Cutter until
the blades contact the foil, and turn the Foil Cutter in a twisting motion, cutting
the foil .
3 . Remove the foil to expose the cork surface .
USING THE WINE OPENER
1 .
Place the Wine Opener (the end with the corkscrew) on top of the wine bottle,
making sure that the Wine Opener remains as upright as possible at all times . If
you hold the opener at an angle, it will not remove the cork properly .
2 . Hold the Wine Opener firmly and press the Wine Opener button . The corkscrew
will turn, enter the cork, and gradually remove the cork from the bottle . When
the corkscrew stops, the cork has been fully removed from the bottle .
3 . Lift the Wine Opener up and off the bottle .
4 . To remove the cork from the corkscrew, press the Cork Release button . The
corkscrew will lower and release the cork .
5 . Return the Wine Opener to the charging base . This will protect the mechanism
while it is not in use .
USING THE AERATOR
To aerate your wine, place the wine aerator into the wine bottle and pour the wine .
You will see bubbles as air is incorporated into the the wine as it is being poured .
Rinse the aerator and return to the charging base .
