Brooks Stairlift, Installation And Operation Instructions Manual

Page: 27 / 32

1.3 SAFETY CHECKS
Checklist - to be completed after installation and, if applicable, recorded on the installation
work report by ticking the appropriate box and making supplementary notes as required.
1.3.1 Check Controls
1. Press the toggle in the ‘DOWN’ direction.
The stairlift should start to travel down.
2. Press the toggle switch in the ‘UP’
direction. The stairlift should start
to travel upwards.
1.3.2 Check Remote Controls
1. Press the GREEN button on the remote and
the stairlift will descend.
By releasing the button the stairlift will stop
travelling.
2. Pressing the RED button on the remote and
the stairlift will travel in upwards.
By releasing the button the stairlift will stop
travelling.
1.3.3 Check Safety Sensors
1. Footrest ‘top’ side sensor - with the lift
ascending, push top-side spring-loaded edge
of footrest - lift should stop immediately.
LED Display will show
2. Footrest ‘bottom’ side sensor - with the lift
descending, push bottom-side spring-loaded
edge of footrest - lift should stop immediately.
LED Display will show
3. Footrest base sensor - with the lift
descending, push in the base of the footrest
- lift should stop immediately.
LED Display will show
4. Carriage ‘top’ side sensor - with the lift
ascending, push the top-side spring-loaded
moulding attached to the carriage,
immediately surrounding the rail - lift
should stop immediately.
LED Display will show
27