MagnaTran 7.1 User’s Manual
Operation
MN-003-1600-00
Controls and Indicators
Brooks Automation
Revision 2.2
6-21
Controls and Indicators
Overview
The MagnaTran 7 Robot is designed to be installed in multi-station transport modules
and remotely controlled and monitored by either a host controller or through the
Control/Display Module. Therefore, very few user accessible controls or indicators
are needed. Those controls and indicators available are only expected to be used dur-
ing testing of the robot prior to installation in a system or during service.
Depending on the I/O board type provided, the Interface Panel will be different.
shows the I/O Panel for a High Side I/O board. Others look similar.
Controls
All settings are controlled by the command set. No user controls are accessible on the
robot.
Indicators
All user visible indicators are located on the front panel of the robot. See
for
indicator functions.
