Bronkhorst®
Instruction Manual mini CORI-FLOW™ M1x
9.17.050O
9
1.5
Calibration
The mini CORI-FLOW has been factory calibrated. Periodical inspection, recalibration or verification of the accuracy may be
subject to individual requirements of the end user.
Bronkhorst certifies that the instrument meets the rated accuracy. Calibration has been performed using measurement
standards traceable to the Dutch Metrology Institute (VSL).
Unless specified otherwise, mini CORI-FLOW™ M1x instruments are H
2
0 calibrated.
1.6
Maintenance
The mini CORI-FLOW needs no regular maintenance if operated properly, with clean media, compatible with the wetted
materials, avoiding pressure and thermal shocks and vibrations. Units may be purged with a clean, dry and inert gas or
flushed with a non-aggressive and non-corrosive cleaning liquid.
In case of severe contamination, cleaning the internal fluid path (the wetted parts) of the instrument may be necessary.
Inexpertly servicing instruments can lead to serious personal injury and/or damage to the instrument or the system it is
used in. Servicing must therefore be performed by trained and qualified personnel. Contact your Bronkhorst representative
for information about cleaning and calibration. Bronkhorst has a trained staff available.
1.7
Documentation
The mini CORI-FLOW comes with all necessary documentation for basic operation and maintenance. Some parts of this
manual refer to other documents, most of which can be downloaded from the Bronkhorst website.
The documentation listed in the following table is available on the
mini CORI-FLOW
product pages under
www.bronkhorst.com/products
Type
Document name
Document no.
Manuals
Instruction Manual mini CORI-FLOW™ M1x (this document)
9.17.050
Quick Installation Guide mini CORI-FLOW
9.17.052
Technical documentation
Hook-up diagram Analog/RS-232
9.16.044
Hook-up diagram DeviceNet™
9.16.050
Hook-up diagram FLOW-BUS
9.16.048
Hook-up diagram Modbus
9.16.066
Hook-up diagram PROFIBUS DP
9.16.049
Dimensional drawings
model specific
The documentation listed in the following table can be downloaded from
www.bronkhorst.com/downloads/
Type
Document
Document no.
General documentation
EU Declaration of Conformity
9.06.059
Manuals
Manual DeviceNet™ interface
9.17.026
Manual EtherCAT® interface
9.17.063
Manual FLOW-BUS interface
9.17.024
Manual Modbus interface
9.17.035
Manual PROFIBUS DP interface
9.17.025
Manual PROFINET interface
9.17.095
Manual RS-232 interface
9.17.027
