Bronkhorst®
Instruction Manual ES-FLOW™
9.17.116B
17
3.3.1.4 Editing setpoint
·
The setpoint of a controllable instrument can be changed if the parameter is displayed in the custom readout area.
·
Instruments without a control function have no editable setpoint and can only be monitored (
Custom readout 1
not
available).
If the setpoint is configured to be entered as a character string, follow these steps to change its value:
1. Select a readout area
that displays the
setpoint:
2. Press to enter edit
mode (the first
character position is
highlighted):
3. Press or to select
the required character:
4. Press to advance to
the next character
position:
On confirmation of the last digit, the entered value is stored and edit mode is left (whereupon the character highlight is
removed).
If the setpoint is configured to be entered step-wise, follow these steps to change its value:
1. Select a custom
readout area that
displays a setpoint:
2. Press to enter edit
mode (the current
value is highlighted):
3. Press or to
change the parameter
value (hold the button
to scroll fast):
4. Press to store the
current value and leave
edit mode:
The setpoint input method (string or step-wise) can be set in the
menu (Settings > Setup > Customize > Setpoint)
3.3.1.5 Resetting counter
1. In the main screen,
select the
Custom
readout 2
area:
2. Press to enter edit
mode:
3. Press or to
change the value to
'yes':
4. Press to confirm the
selected option and
reset the counter:
