Bronkhorst®
Instruction Manual ES-FLOW™
9.17.145E
16
The communication status of the instrument can be monitored
with the three LEDs to the left of the screen. See
for a description of the possible indications.
A multifunctional switch ( ) to the right of the screen can be
used to start several functions without having to enter the
menu (see
).
3.3.1
Main screen functions
3.3.1.1
Unlocking buttons
The switch lock function prevents accidental activation of the user interface (.e.g. by cleaning the instrument and/or its
environment with a hose or high-pressure cleaner). The lock is activated after a period of inactivity (lock time; 60 seconds by
default), after which the individual tip buttons are disabled. The buttons can be unlocked by pressing and holding and
for a couple of seconds (unlock time; default: 4 seconds).
The switch lock properties can be edited in the
Settings
menu.
3.3.1.2
Selecting display information
The
Custom readout 2
area can show different parameters.
Depending on the instrument type, the following parameters
may be available (editable parameters are marked with an *):
·
setpoint
*
·
percentage reading
·
actuator/valve percentage
·
counter
*
·
alarm
*
·
capacity
·
temperature
·
density
·
instrument
*
To change the displayed parameter, press from the main
screen. Cycle through the available parameters by pressing
the button repeatedly.
3.3.1.3
Selecting screen area
Depending on the instrument type and the settings of the
readout and control unit, none, one or both of the custom
readout areas can display an editable parameter. If an area
contains an editable parameter, it can be selected and edited
in place. Selection is made visible by a red line above the
concerning area.
·
To cycle through the editable screen areas, press or
repeatedly
·
To enter edit mode for the selected area, press
·
When edit mode is active, press at any time to leave edit
mode without making changes
