17
Function numZeS Meaning and possiZle settings
4
Flash counter:
Figure group in the display: xxxx
gg
¤ standard display
Figure group in the display: xx
gg
xx
¤ after pressing the energy control "up" key
Figure group in the display:
gg
xxxx
¤ after pressing the energy control "up" key
5
Series number of the unit: Figure group in the display: xx
gg
6
Series number of the unit: Figure group in the display:
gg
xx
7
Production date of the unit:
Figure group in the display: xx
gg
¤ month
8
Production date of the unit:
Figure group in the display:
gg
xx ¤ year
9
Reduction of the modelling light: Setting ex work: "off” (--)
The activation of this function is recommended on power mains
with great fluctuations. The voltage for the modelling lamp is
reduced (light output ./. 1/3 f-stop), which results in a longer
service life of the halogen lamp. If this function is activated, the
digital display shows the value "on”.
1a. kSotectiQe Yacilities / Fault indication
1a.1 Fooling Yan
The cooling of flash tube, modelling lamp and internal electronics is effected by a cooling
fan. It also runs when the modelling light is turned off. The cooling works on two levels,
the fan runs smoothly when small flash sequences are effected. With longer flash
sequences, the cooling fan switches to the higher level.
1a.a Displa| mthm
If excessively high temperatures build up inside despite the fan cooling, the charge mode
will be blocked and a long audible signal will be generated. The modelling light is blocked
as well for about 6 minutes. The digital display shows the indication "th” during the
cooling period. The cooling process is accelerated by the fan which is still in operation.
Attention:
Do not sOitch oYY the unit duSing the cooling peSiodE
Otherwise the
number of flashes will be reduced until the next blockout.
1a.^ Displa| mA1m
The unit is equipped with an automatic afterglow blockout. If the flash tube exhibits (e.g.
at the end of its service life) afterglow, this blockout will block further charging to prevent
consequential damage. This status is also noticeable from the ready display, which is no
longer green. The blockout can be cancelled by switching the unit off and on again.
