Brompton TESSERA M2, User Manual

Page: 61 / 296

TESSERA - V3.0 | USER M ANUAL - REV B | SECTION 7 - PROJECT SETUP
61
SECTION 7 - PROJECT SETUP
7.1 - PROJECT MANAGEMENT
7.1.1 - OPENING AND IMPORTING
PROJECTS
Select a project from the list then click Open from the left m enu. You can also im port projects
from USB drives or the local com puter storage drive.
Fig 7.1 - Im porting projects in the project m anagem ent screen
To im port a project using the processor:
1. Insert a USB flash drive containing the project file into a USB port of the processor.
2. Click Open on the project m anagem ent screen to display the File Browser.
3. Navigate to a project file, select and click OK. The project file is copied and displayed in the
list of projects stored on the processor.
4. Double click the file to open it.
To im port a project while connected to the processor via Tessera Rem ote: