Brompton TESSERA M2 User Manual Download Page 48

Page: 48 / 296

TESSERA - V3.0 | USER M ANUAL - REV B | 5.3 - INSTALLATION FOR WINDOWS PC

Tessera Rem ote software versions and the processor firm ware versions m ust m atch. If the

processor firm ware version and Tessera Rem ote do not m atch, the firm ware or rem ote

software m ust be updated. The processor firm ware can be updated from the rem ote app.

5.3 - INSTALLATION FOR WINDOWS
PC

1. Download Tessera Rem ote Windows software from our

Brom pton Support

web page:

https://www.brom ptontech.com /support

2. Open the downloaded file to begin Setup Wizard. Hit Next to continue.

3. The setup wizard asks for an install location, once selected click Next to begin the

installation.

4. When the application has finished installing, a com pletion dialog box is displayed. Tick the

‘Run Tessera Rem ote’ box to launch the application after clicking Finish.

Summary of Contents for TESSERA M2









































































































































































































































































































Search results

Summary of Contents for TESSERA M2

Reviews:

Brompton TESSERA M2, User Manual, Page: 48 / 296

Search results

Summary of Contents for TESSERA M2

Reviews: