Brompton TESSERA M2, User Manual, Page: 33 / 296

TESSERA - V3.0 | USER M ANUAL - REV B | 3.3 - CONNECTING FIXTURES
33
3.3 - CONNECTING FIXTURES
Fig 3.4 - Add Fixtures from Network button
1. Ensure that all fixtures are connected to the processor with the desired topology, taking
into consideration the output port’s capacity lim it.
2. Click the Add Fixtures From Network button. The canvas toolbar is replaced with a row of
currently connected fixtures. When using Add Fixtures From Network, strings of fixtures
are highlighted with colours corresponding to the ones shown in the UI. Each string is
assigned a unique num eric code which appears on the first fixture of the string during
association.
Fig 3.5 - The Add Fixtures From Network toolbar, the right-side shows connected fixtures whilst
in Add Fixtures From Network m enu.
3. Entering this code on the processor (using num ber keys or num pad) selects the
corresponding string for association. The string is then ready to be drawn in the canvas
using the cursor.
Fig 3.6 - Associating Fixtures
Fig 3.7 - A highlighted Recoloured string
4. The first fixture in the string is highlighted white, while other fixtures display varying
shades of the sam e colour to denote the order of the fixtures in the string - from brightest
to darkest.